å¤åˆæ料循环è…èš€è¯•éªŒç®±èƒ½å¤Ÿè¿›è¡Œä¼ ç»Ÿç›é›¾ã€å¹²æ¹¿äº¤æ›¿æ··åˆç›é›¾è¯•éªŒä»¥åŠå¤§å¤šæ•°æ±½è½¦å¾ªçŽ¯è…蚀试验。它是专门设计和组æˆçš„，旨在控制ç›é›¾ã€ç›¸å¯¹æ¹¿åº¦ã€ç©ºæ°”干燥度ã€å†·å‡æ¹¿åº¦ã€è‡ªåŠ¨å–·é›¾ã€ç›æ°´æµ¸æ³¡ã€æ—‹è½¬å–·é›¾ã€ä½Žæ¸©ç‰æ ‡å‡†çš„è¦æ±‚。ç›é›¾æŸœç”¨äºŽçƒ¤æµ‹è¯•æ¼†ä»¶ã€é‡‘属元件ã€ç”µå元件ã€çŸè·¯æ¼†ä»¶ç‰ã€‚如果您需è¦æ›´å¤šæµ‹è¯•è®¾å¤‡åž‹å·ï¼Œè¯·å‚考我们的测试室-测试（.）com
特å¾
1ã€ç›é›¾è¯•éªŒç®±ç»“构：外壳为全防è…结构，采用多层玻璃纤维增​​强èšé…¯æ ‘脂制æˆï¼Œå¹¶é‡‡ç”¨è€è…蚀ææ–™æž„é€ ã€‚
2.独特的设计：喷雾é¢ç§¯å¤§ï¼Œæµé‡å¤§ï¼Œä¸Žç›é›¾åŠŸèƒ½ä¸‹é›¾åŒ–溶液相比，喷雾时间更çŸã€‚
3.定制喷嘴：特定喷嘴将溶液å‡åŒ€å–·å°„åˆ°æµ‹è¯•æ ·å“上，溶液æµé‡å¯è°ƒèŠ‚。
4.喷嘴安装在独立模å—上，å¯ç”¨èµ·é›¾åŠŸèƒ½æ—¶å¯è½»æ¾æ‹†å¸ã€‚
5.å¯ç¼–程触摸å±æŽ§åˆ¶å™¨ï¼Œä¸è‹±æ–‡æ“作，并å¯é‡‡é›†æ•°æ®ã€‚
6.Standard test specimen racks are provided, capable of accommodating flat samples. For oversized and heavy three-dimensional samples (such as automobile hubs and engine components), grid kits with the same height as the support can be used. The enclosure is structurally robust, allowing for even distribution of the load.
7.The spray on/off time can be programmed directly to better control the corrosion rate.
Meet standard:
DO160 E/F/G Salt spray test requirements
GB/T 20854-2007/ISO14993-2001
Accelerated testing of corrosion cycles of metals and alloys exposed to salt spray, \\\\\\\"dry\\\\\\\" and \\\\\\\"wet\\\\\\\" conditions
GB/T24195-2009/ISO 16151:2005 Cyclic accelerated corrosion tests under acid salt spray, dry and wet conditions
GJB 150.11A-2009 Military equipment laboratory environmental test method salt spray test
GB/T 2424.17-2008/IEC60068-2-11:1981ç›é›¾è¯•éªŒæ–¹æ³•
GB/T 2423.18-2012/IEC 60068-2-52:1996 æ°¯åŒ–é’ äº¤æ›¿ç›é›¾è¯•éªŒæ–¹æ³•
GB/T 2423.3-2006/IEC6008-2-78-2001试验室：æŒç»æ¹¿çƒè¯•éªŒæ–¹æ³•
GB/T 10125-2012/ISO9227-2006 人工气氛ç›é›¾è¯•éªŒè…蚀试验
GB/T 31467.3-2015
电动汽车用锂离ååŠ¨åŠ›ç”µæ± ç»„åŠç³»ç»Ÿ
- 第3部分：安全è¦æ±‚和测试方法：ç›é›¾æµ‹è¯•
ASTM B117ã€ASTM B368
GB/T 10587-2006ç›é›¾è¯•éªŒç®±æŠ€æœ¯æ¡ä»¶
GB/T 10586-2006 湿çƒè¯•éªŒç®±æŠ€æœ¯æ¡ä»¶
GB/T 5170.8-2008_电工电å产å“环境试验设备试验方法ç›é›¾è¯•éªŒè®¾å¤‡
