SJS Enersol LLC
P.O.Box: 13760 New Industrial Area, Al Zahra Behind Al Hooth Centre, Ajman-UAE Ajman
United Arab Emirates

Home

Our Products

WASHER

A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut.

MELESI BLIND FLANGE

A blind flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.

MELESI SLIP ON FLANGE

Slip on flanges are manufactured with an inside diameter that is slightly bigger than the pipe's outside diameter. These attachments are connected to the pipe via fillet weld at the top and bottom of the flange. Slip on pipe flanges are typically provided with a raised or flat face.

MELESI SOCKET WELD FLANGE

Socket Weld flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges.

MELESI WELD NECK FLANGE

A weld neck flange (also known as a high-hub flange and tapered hub flange) is a type of flange. There are two designs. The regular type is used with pipes. The long type is unsuitable for pipes and is used in process plant. A weld neck flange consists of a circular fitting with a protruding rim around the circumference. Generally machined from a forging, these flanges are typically butt welded to a pipe. The rim has a series of drilled holes that permit the flange to be affixed to another flang ...

SANTAFEDE SLIP ON FLANGES

HEAVY HEX NUT

Heavy hex nuts are slightly larger and thicker than standard (finished) hex nuts. There are numerous grades and the heavy pattern is typically used for large diameter and high strength bolts.

HEX BOLT

WE MANUFACTURE HEX BOLT FROM 8 MM-100 MM ACCORDING TO CUSTOMER'S REQUIREMENT

HEXAGONAL NUT

A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten two or more parts together. The two partners are kept together by a combination of their threads' friction, a slight stretching of the bolt, and compression of the parts to be held together.